Using manual exposure, Using voice recording, Setting the drive mode – HP CC450 User Manual
Page 45
41
Using Manual Exposure
When the camera is in the manual exposure mode, you can change either aperture or shutter speed, or both.
To activate Manual Exposure
Select
1.
from the Scene Mode submenu.
Press
2.
OK button
to enter the adjust mode.
Use the
3.
or keys to select the shutter speed.
Or, use the
4.
or
keys to select the aperture value.
Use the
5.
OK button
to switch between aperture
and shutter speed adjustment and vice versa.
Displays the aperture and shutter
speed value
Press the
6.
Shutter button
to capture the image.
Using Voice Recording
From the Scene menu, select
1.
. The Voice Recording
screen layout is displayed on the LCD monitor.
Press the
2.
Shutter button
to start recording.
Press the
3.
Shutter button
again to stop
recording.
Setting the Drive Mode
This camera features a Self-timer and Burst which can be set in the Burst mode function in the Record Menu. The
Self-timer will take photos after a predefined delay. The burst will take consecutive shots. This function is only
available in Photo mode. The Burst mode setting is automatically set to off when you turn off the camera.
To set the Drive Mode
From the Record menu, select
1.
Drive Mode.
Use the
2.
or
keys to go through the selection.
Press the
3.
OK button
to save and apply changes.
The table below shows the available Drive mode settings.