HP CC450 - Manual (Page 49)

45
Setting the Digital Zoom
This feature controls the digital zoom mode of your camera.
Your camera enlarges an image using the optical zoom first.
When the zoom scale exceeds 4x, the camera uses digital
zoom.
To set Digital Zoom
From the Record menu, select 1. Digital Zoom.
Use the 2. or keys to go through the selection.
Press the 3. OK button to save and apply changes.
The table below shows the available Digital Zoom settings.
Icon Item Description
Intelligent
Zoom Enlarges the image digitally with almost no distortion. This feature is available
for still images only.
Standard Zoom
Enlarges all image sizes up to a maximum of 5x in playback, but the image
quality deteriorates.
Off Uses the optical zoom only.
Digital Zoom is not available in Smile Capture, Movie, and Voice Recording modes. •
The maximum Intellect zoom scale varies depending on the image type and •
resolution.
Setting the Date Stamp
The date of recording can be printed directly on the still images. This function must be activated before the image is
captured. Once date and time are stamped on a photo, they can no longer be edited or deleted.
Limitations of Date Stamp functions are as follows:
Available for Photos only. •
May slow down AEB/ Burst mode when Date Stamp is enabled in AEB/ Burst mode. •
In vertical or rotated images, the date and time on your photos still appear horizontally. •
To set Date Stamp
From the Record menu, select 1. Date Stamp.
Use the 2. or keys to go through the selection.
Press the 3. OK button to save and apply changes.