Setting auto review, Recording videos – HP CC450 User Manual
Page 50
46
Setting Auto Review
The Auto Review function lets you view the captured image
right after shooting it.
If Auto review is On, the camera will display the captured
image for 1 second on the LCD monitor.
To set Auto Review
From the Record menu, select
1.
Auto Review.
Use the
2.
or
keys to go through the selection.
Press the
3.
OK button
to save and apply changes.
Recording Videos
Record videos with the camera, the available recording time depends on the capacity of the memory card. Videos can
be recorded until the maximum memory capacity has been reached. However the length of a single video may be
limited (the limitation depends on the camera model).
Slide the
1.
Mode switch to Video mode
.
Focus your camera on the subject that you want to take.
2.
Press the
3.
Shutter button
to start recording.
Use the
4.
Zoom buttons
to zoom in and zoom
out an image.
To pause recording, press the key
5.
.
To continue recording, press the key
6.
again.
To stop recording, press the
7.
Shutter button
.
When the camera stop recording due to reaching maximum capacity (
•
4GB) for a single
video, simply press the Shutter button again to continue recording.
The camera will automatically stop recording when the memory capacity is full.
•
Digital zoom is not available while recording a movie.
•
Sound cannot be recorded while using zooms (Pressing the
•
Zoom buttons
).
Power save is not available in movie recording or pause recording.
•