HP 409054-003 - Manual (Page 44)

Local port operation 44
Assigning names to servers
1. From the Names dialog box (" Assigning server and serial device names " on page 43 ), select the
name or port number and click Modify. The Name Modify dialog box appears.
2. Enter a name in the New Name field. Names can be one to 15 characters in length. Permitted
characters are case-sensitive and can consist of A–Z, 0–9, spaces, and hyphens.
3. Click OK to transfer the new name to the names list in the Names dialog box.
4. Repeat steps 1 through 3 for each server in the system.
5. Click OK to save settings, click X to exit, or press the Esc key to exit without saving settings.
NOTE: Changes made in the Name Modify dialog box are not saved until you click OK in the
Names dialog box.
Setting up a scan pattern
In Scan mode (" Activating Scan mode " on page 46 ), the console switch automatically scans port to port
(server to server).