HP 409054-003 User Manual
Page 19
Installing the console switch 19
WARNING:
To reduce the risk of electric shock or damage to the equipment:
•
Do not disable the power cord grounding plug. The grounding plug is an important safety
feature.
•
Plug the power cord into a grounded (earthed) electrical outlet that is easily accessible at all
times.
•
Unplug the power cord from the power supply to disconnect power to the equipment.
•
Do not route the power cord where it can be walked on or pinched by items placed against
it. Pay particular attention to the plug, electrical outlet, and the point where the cord
extends from the storage system.
2.
Plug the console switch power cord into a power source.
3.
Power on the console switch. The activity indicator light ("
powers on.
NOTE:
UTP CAT5 cables are used throughout the examples in this guide. However, UTP CAT6
and UTP CAT7 cables may also be used.
4.
Connect a UTP CAT5 cable to the LAN connector on the console switch.
5.
Connect the other end of that same UTP CAT5 cable to an Ethernet switch.
The following figure shows one possible configuration for your console switch system.
Item Description
1 Local
console
2 Console
switch
3 Ethernet
switch