HP BL465C - Manual (Page 39)

Removal and replacement procedures 39
3. Press down firmly until the processor installation tool clicks and separates from the processor, and
then remove the processor installation tool.
4. Close the processor retaining bracket and the processor retaining latch.
5. Clean the old thermal grease from the heatsink with the alcohol swab. Allow the alcohol to
evaporate before continuing.
6. Apply all the grease to the top of the processor in one of the following patterns to ensure even
distribution:
CAUTION: The heatsink thermal interface media is not reusable and must be replaced if the
heatsink is removed from the processor after it has been installed.