HP BL465C - Manual (Page 36)

Removal and replacement procedures 36
4. Install the heatsink.
5. Install the access panel (" Access panel " on page 24 ).
6. Install the server blade.
Processor
WARNING: To reduce the risk of personal injury from hot surfaces, allow the drives and the
internal system components to cool before touching them.
CAUTION: To prevent possible server malfunction, do not mix processors of different speeds or
cache sizes. Refer to the label on the processor heatsink for a description of the processor.
CAUTION: To prevent possible server blade overheating, always populate each processor
socket with a processor socket cover and a heatsink blank or a processor and a heatsink.
IMPORTANT: Processor socket 1 must always be populated. If processor socket 1 is empty, the
server blade does not power up.
To remove the component:
1. Power down the server blade (on page 23 ).
2. Remove the server blade (on page 23 ).
3. Remove the access panel (" Access panel " on page 24 ).
4. Remove the heatsink (" Heatsink " on page 34 ).