Error messages – Hitachi DZ-BD10HA User Manual

Page 89

Ad
di

on
al I
n

tio

If an error message appears while operating the camcorder, refer to the following table
for details and remedies.

Error Messages

Message

Cause & Troubleshooting

Reference

page

(1) Disc is not
formatted. Format
the disc now?
(2) Disc Format.
Select record format.
(Displayed only
when DVD-RW is
used.)

These messages appear when a new BD-RE/BD-R/DVD-
RW is inserted.

(1) Found partially
damaged video.
Recover video data?
(2) Found damaged
video. Recover video
data?
(3) Recovering... It
may take a long
time. Continue
recovery?

The system cannot normally complete writing of a file if
the power is turned off for some reason during recording
or editing. Selecting “YES” will automatically repair the
video file. If you quit recovery by pressing C, the same
message will appear when the camcorder is turned on
next time. (Do not remove the disc while the camcorder is
recognizing it. Removing the disc will deactivate the file
repair function.)
• Be sure to use the AC adapter/charger to power the

camcorder when repairing data. Repair is not possible
using a battery. If a battery is attached, turn the power
switch off, connect the AC adapter/charger, and then
turn the power back on and follow the on-screen
instructions.

• Repair will normally take several minutes, but it may

take up to one hour.

• Data may not be repaired.
• The repaired data may differ from the original recorded

content due to deleted defects.

• Since the date/time for repair is added to the repaired

data (only the corrected portion for partial repair), the
original date/time information will be lost.

• See *1 on p.95

—

All scenes are
already dubbed.
Please use other Dub
Mode.

This message will appear if you attempt a “New” dubbing
when there are no un-dubbed scenes on the HDD. Turn
off the dubbed marks on scene(s) you want to dub, or
choose another dubbing method.

56, 60

Cannot combine
scene.

Only consecutive scenes can be combined.