Hitachi DZ-BD10HA - Manual (Page 18)

18
Le
t’
s Ge
t St
ar
ted
Preparing
„ Setting up the battery pack
Connect the power cable to the AC adapter/charger.
Plug in the power cable to a wall outlet.
Attach the battery pack to the AC adapter/charger.
Attach the battery pack to the camcorder.
z Charge status of the battery pack
The CHARGE indicator of the AC adapter/charger allows you to check on the
charge status of the battery pack.
Charge Status CHARGE indicator CHARGE indicator
During charge lit
* For details on charging time,
see p.25. Charge complete Unlit
Terminal at
bottom
Note
Charging will not occur if the DC power
cord is connected.
If the CHARGE indicator does not light,
check that the connections (
, , )
are firmly connected.
CHARGE indicator
Notes
• Charge battery pack in temperatures above +50 degrees F (10 degrees C)
and below +86 degrees F (30 degrees C).
• Use only the AC adapter/charger which accompanied your camcorder or
direct replacement as listed in this manual.
Let’s Get Started