System administration and troubleshooting 5, System administration using the controller lcd, Setting the screen language – Honeywell ULTRAKEY LITE HJC5000 User Manual
Page 65: System administration and troubleshooting, Chapter 5, System, Administration using the controller lcd

Document 800-07422 Rev A
65
08/10
5
System Administration and Troubleshooting
In this section:
•
System Administration Using the Controller LCD
•
System Administration Using the Web Browser
System Administration Using the Controller LCD
To navigate all configuration LCD menus, see
on
Logging in and Navigating to the System Set: Config Menu
1.
If not already done, install and connect the controller to a power source.
The UltraKey Lite LCD displays.
2.
From the home screen, press
Alt > Clr
to enter the Password menu.
3.
Enter the PIN password 3434, then click Enter or Login.
The System Set: Mode screen displays.
Setting the Screen Language
1.
Log into the controller.
2.
From the System Set: Config menu, press the LCD
up/down arrow keys to scroll to Language. Press Ent.
3.
Press the LCD up/down arrow keys
to scroll through the
options and select English or French. Press Ent to save.
Configuration
Language