Step 1: configure ultrakey lite to maxpro mode, Step 2: configure maxpro network settings, Figure 4-12 – Honeywell ULTRAKEY LITE HJC5000 User Manual
Page 61: Figure 4-13, System configuration tab
UltraKey Lite Controller Installation and User Guide
Document 800-07422 Rev A
61
08/10
Figure 4-12
UltraKey Lite Login page
Step 1: Configure UltraKey Lite to MAXPRO Mode
1.
Log into the web browser.
2.
From the top menu, click the Configuration tab. See
3.
From the side menu, click the System Configurations tab.
4.
From the System Mode drop-down list, select MAXPRO.
5.
From the System Language drop-down list, select English or French.
6.
From the Background Light drop-down list select ON or OFF.
7.
Click Apply to save the configuration, Cancel to exit without saving or Default to
restore all factory default values.
Figure 4-13
System Configuration Tab
Step 2: Configure MAXPRO Network Settings
1.
From the side menu, click MAXPRO Configuration. See
.
2.
Under Keyboard ID Setting, enter a number between 1 and 99 to set the controller
ID.