Honeywell ULTRAKEY LITE HJC5000 - Manual (Page 31)

Document 800-07422 Rev A 31
08/10
3
Installing UltraKey Lite with VideoBloX
In this section:
• Navigating the LCD Configuration Menus , page 31
• Installing and Configuring a Serial Connection , page 32
• Installing and Configuring an Ethernet Connection , page 36
• (Optional) Configuring UltraKey Lite Using the Web Browser , page 41
Note For all installations, refer to the applicable VideoBloX or VideoBloX Lite
installation or user guides for more information.
This section explains how to connect the UltraKey Lite controller to VideoBloX and how
to enter the basic configuration settings specific to VideoBloX. UltraKey Lite can control
the remote VideoBloX via either the serial port or the Ethernet.
Navigating the LCD Configuration Menus
Note The use of the arrow keys under the LCD is used for the following instructions.
See
Figure 3-1 . Also see Using the UltraKey Lite to Navigate the LCD Menus
on page 22 for detailed instructions for other ways to navigate or System
Administration Using the Controller LCD on page 65 for a configuration menu
tree.