HANNspree LT12-23U1-000 - Manual (Page 37)

36
Notes:
• The TV supports S-Video input in addition to normal video and audio
signals. The TV detects the signal type automatically and gives priority
to S-Video when two signals are detected at the same time.
• AV5 appears on selected models only.
Adjusting the Volume
1
Press volume up to increase the volume.
2
Press volume down to decrease the volume.
3
Press mute to eliminate sound. The word “MUTE” appears on the
bottom right corner of the screen and sound is turned off.
4
Press mute again to restore the original volume.
Using PIP and POP
The TV features Picture-in-Picture (PIP) and Picture-outside-Picture (POP),
enabling you to view two sources at the same time. Follow these
instructions.
1
Turn on the TV and select a source
signal.
2
Press PIP/POP from the remote
control.
A picture-in-picture window appears on
the display, using the last selected
source signal for the PIP.
Note:
Refer to “PIP Operation Mode” on page 89 for information on which
sources are compatible with each other in PIP and POP mode.
MAIN - TV CH 007
MAIN - TV CH 007
PIP - CATV CH 056