HANNspree LT13-23A1 - Manual (Page 38)

37
Using PIP and POP
The TV features Picture-in-Picture (PIP) and Picture-outside-
Picture(POP), enabling you to view two sources at the same time.
Follow these instructions.
1 Turn on the TV and select a
source signal.
2 Press the PIP button on the
remote control.
A picture-in-picture window
appears on the display, using the
last selected source signal for the
PIP.
Note:
Refer to “PIP Operation Mode” on page 76 for information on which
sources are compatible with each other in PIP and POP mode.
3 Press the SWAP button on the
remote control to switch the focus
from the PIP to the main source.
The PIP identification line
disappears and the PIP window
border disappears.
MAIN - TV CH 007
MAIN - TV CH 007
PIP - CATV CH056
MAIN - TV CH 007