beautypg.com

Havis-Shields Chevrolet Van Rear Air Vent Adapter Kit KK-C-VAK User Manual

Page 3

background image

KK-C-VAK_INST_10-07

Route HVAC 2 1/2” blower hoses to the
approximate locations with tape along
ceiling where they will be installed into the
ceiling insert after Kwik-Kit insert is
installed. Mount hoses with wire ties at
wall and ceiling corners only. Leave
enough slack to reach hoses for permanent
mounting.

Attach the “Y” duct hose adaptor to
the 8 foot front duct hose and
connect both 4 foot hoses from “Y”
to vents in driver and passenger side
front ceiling. This will provide a
total of four ceiling vents.

Route hose straight up from the HVAC unit
and tie tight to corner of the van

When routing the hoses, tie together using

15” wire ties, to keep a neat and tight fit to

the wall of the vehicle.

This will minimize the risk of damage when

installing Kwik kit