beautypg.com

Havis-Shields 1995-2007 Ford Crown Victoria Trak-Mount Kit C-TM-CV User Manual

Install instructions c-tm-cv

background image

INSTALL INSTRUCTIONS C-TM-CV

1995-2007 FORD CROWN VICTORIA TRAK-MOUNT KIT

TOOLS REQUIRED:
Ratcheting

Wrench

Metric Socket Set

Standard Socket Set
Tape Measure

HARDWARE:
QTY DESCRIPTION PART#

10

¼” x ¾” Hex head bolt

GSM33001

6 ¼”

Serrated

nut

GSM30023

4

¼” Flat washer

GSM31005

4

¼” Split lock washer

GSM31026


SUB ASSEMBLY:

1. MOUNT TRAK TO HUMP BRACKETS.

• Determine location that Trak will land on transmission hump for the specific

application.

• With Trak in necessary location, measure Front and Rear Hump Bracket in relation to

Trak.

• Bolt trak to the front hump bracket, top plate using measurements taken in previous

step. Use (4) ¼-20 x ¾” Hex head bolts and serrated nuts.

Note: There are 2 different sides to the Trak Plate. It is recommended to mount Hump brackets to
side of Trak Plate that has ¼” hardware slots closer together, to better accept equipment, (consoles,
control heads, etc)

Trak Mount

Rear Hump

Brackets (C-B16)

Front Hump

Bracket (C-B33)

¼” Hardware

Slots

TRAK-MOUNT ASSEMBLY