HP PA 8800 - Manual (Page 20)

OpenView Operations Agent OpenView Operations Agent OpenView Operations Agent OpenView Operations Agent-collects and correlates OS and application events (fee-based)
OpenView Performance Agent
OpenView Performance Agent OpenView Performance Agent OpenView Performance Agent-determines OS and application performance trends (fee-based)
OpenView GlancePlus
OpenView GlancePlus OpenView GlancePlus OpenView GlancePlus-shows real time OS and application availability and performance data to diagnose
problems (fee-based)
OpenView Data Protector (Omniback II)-
OpenView Data Protector (Omniback II)- OpenView Data Protector (Omniback II)- OpenView Data Protector (Omniback II)-backs up and recovers data (fee-based)
In addition, the Network Node Manager (NNM) management station automatically discovers, draws (maps), and monitors
networks and the systems connected to them.
All other OpenView management tools, such as OpenView Operations, Service Desk, and Service Reporter, will be able to
collect and process information from the agents running on the server.
General Site Preparation Rules General Site Preparation Rules General Site Preparation Rules General Site Preparation Rules
AC Power Requirements AC Power Requirements AC Power Requirements AC Power Requirements The modular, N+1 power shelf assembly is called the Front End Power Subsystem (FEPS). The redundancy of the FEPS is
achieved with 6 internal Bulk Power Supplies (BPS), any five of which can support the load and performance requirements.
Input Power Options Input Power Options Input Power Options Input Power Options
PDCA Product PDCA Product PDCA Product PDCA Product
Number
Number Number Number
Source Type Source Type Source Type Source Type Source Voltage Source Voltage Source Voltage Source Voltage (nominal) PDCA PDCA PDCA PDCA
Required
Required Required Required
Input Current Per Input Current Per Input Current Per Input Current Per
Phase (200-240
Phase (200-240 Phase (200-240 Phase (200-240
VAC
VAC VAC VAC
Power Required Power Required Power Required Power Required
A5800A
Option 006 3-phase Voltage range 200-240 VAC,
phase-to-phase, 50/60 Hz 4-wire 44 A Maximum per
phase 2.5 meter UL power cord and OL approved
plug provided. The customer must provide the
mating in line connector or purchase quantity
one A6440A opt 401 to receive a mating in
line connector. An electrician must hardwire
the in line connector to
60 A/63 A site power.
a,b,c
A5800A
Option 007 3-phase Voltage range 200-240 VAC,
phase-to-neutral, 50/60 Hz 5-wire 24 A Maximum per
phase 2.5 meter power cord and VDE
approved plug provided. The customer must
provide the mating in line connector or
purchase quantity 1 A6440A opt 501 to
receive a mating in line connector. An
electrician must hardwire the in line
connector to
30 A/32 A site power.
a,b,d
a. A dedicated branch is required for each PDCA installed.
b. In the U.S.A, site power is 60 Amps; in Europe site power is 63 Amps.
c. Refer to Option 006 and 007 Specifics Table
Option 006 and 007 Specifics Table Option 006 and 007 Specifics Table Option 006 and 007 Specifics Table below for detailed specifics related to this option.
d. In the U.S.A. site power is 30 Amps; in Europe site power is 32 Amps.
Console Device Console Device Console Device Console Device PA-800 Superdome integrates console functionality into the Support Management Station. Note that this SMS/Console is
also used on Integrity Superdome.
QuickSpecs HP 9000 Superdome Servers HP 9000 Superdome Servers HP 9000 Superdome Servers HP 9000 Superdome Servers
(PA-8600, PA-8700 and PA-8800) (PA-8600, PA-8700 and PA-8800) (PA-8600, PA-8700 and PA-8800) (PA-8600, PA-8700 and PA-8800)
System Management Features
DA - 11721 North America — Version 13 — April 1, 2005 Page 20