Getting started, Attach the camera strap, Charging the battery by usb – HP PC460T User Manual
Page 9: Inserting the battery
4
5
Getting Started
Attach the Camera Strap
To reduce the risk of dropping the camera, it is strongly
recommended to attach and use the provided camera strap.
Charging the Battery by USB
The battery that comes alone with your package is not fully charged. You need to charge the battery before using the
camera.
Connect the camera with the USB cable as shown.
1.
Connect the other end with the USB adapter and
2.
plug it into a power outlet or with the USB port of PC
directly for charging.
When the battery is charging, the LED indicator
•
lights up.
When the battery is fully charged, the LED indicator
•
goes off.
When the battery is unusual charged, the LED
•
indicator flashes rapidly.
When the camera charges without the battery
•
inside, the LED indicator goes off.
The battery charging time is around 2 hours.
It’s recommended not operating the camera when charging.
Inserting the Battery
Follow these instructions to insert the rechargeable battery into the battery/memory card compartment.
Please read “Battery Information” on page 2 before inserting/removing battery.
If the battery are already installed, make sure to power off
1.
the camera before removing and inserting recharged or new
battery.