HP PC460T - Manual (Page 31)

26 27
Setting the Drive Mode
This camera features a Self-timer and Burst function which can be set in the Drive mode function on the screen.
The Self-timer allows you to take photos after a pre-defined delay. While burst lets you take consecutive shots. This
function is only available in recording still images. The Drive mode setting is automatically set to off when you turn
off the camera.
To activate Drive mode:
Tap the on-screen Drive icon to display the popup drive mode menu and tap the desired icon. •
The table below shows the available Drive mode settings.
Icon Item Description
10 Sec Self-timer
Sets a 10-second delay to capture image after pressing the Shutter button
.
2 Sec Self-timer
Sets a 2-second delay to capture image after pressing the Shutter button
.
Double Self-timer
Performs delay and capture twice:
Performs a 10-second delay, then captures the image. •
Performs another 2-second delay then captures the image again. •
Burst
Performs continuous shooting when the Shutter button is pressed.
Stops shooting when the Shutter button is released.
Speedy Burst Captures 30 images in a shot when the Shutter button is pressed.
Auto set Image size to VGA only.
Off Captures an image without time delay.
Tap operation is disabled during drive mode.