HP PC460T - Manual (Page 46)

42 43
Setting EV Compensation
Images can be captured with the overall scene intentionally
made brighter or darker. These settings are used when a
suitable brightness (exposure) cannot otherwise be obtained
in circumstances where the difference in brightness between
the subject and the background (the contrast) is large, or
when the subject that you wish to capture is very small within
the scene. Available for still images only.
To adjust EV settings:
Tap • or to turn pages and tap the desired EV value.
The available settings are: 0EV +2.0EV/+1.7EV/+1.3EV/+1 •
.0EV/+0.7EV/+0.3EV/0EV/-0.3EV/-0.7EV /-1.0EV/-1.3EV/-
1.7EV/-2.0EV
As you tap and turn through the pages, you can see the closet 3 adjusting preview on screen synchronously.
Setting White Balance
This sets the white balance for a variety of lighting conditions
and permits photos to be captured to the desired level.
As you tap and turn through the pages, you can see the •
closet 3 adjusting preview on screen synchronously.
Below is a table with a description of the different settings •
Icon Item Description
Auto The camera automatically adjusts the white balance.
Daylight Ideally used for bright sunny conditions.
Cloudy Ideally used for cloudy conditions.
Tungsten
Ideally used for indoor photos with tungsten or halogen lighting without a
flash.
Fluorescent 1 Ideally used for indoor photos with reddish fluorescent lighting conditions.
Fluorescent 2 Ideally used for indoor photos with bluish fluorescent lighting conditions.
Manual
Used when light source cannot be specified.
Press the Shutter button for the camera to automatically adjust the
appropriate white balance setting according to the environment.