HP 8100C - Manual (Page 27)

26
Printing to HP JetSend-enabled printers
The digital sender is an HP JetSend-enabled device. You can use its
HP JetSend capabilities to send to printers on your company’s
network that are HP JetSend enabled and have valid TCP/IP
addresses. If you receive a message requesting a TCP/IP address
when you press
P RINT ( F3 ), see the administrator.
You can send one copy at a time to one printer at a time. Whether the
copies print single-sided or double-sided is determined by the
printer’s settings.
HP JetSend is a communications technology built into printers,
scanners, and computer software. HP JetSend-enabled devices can
connect, “talk” to each other, and exchange information directly from
the network. It is server- and program-independent. To find out more
about HP JetSend technology or view a list of supported printers, visit
www.jetsend.com .
To send to an HP JetSend-enabled printer
Note At any time before pressing to send the document, you can press
or B ACK ( F4 ) to return to the main screen without saving any
settings.
1 Press P RINT ( F3 ). This dialog box opens:
2 Do one of the following to choose an HP JetSend-enabled printer:
● Use the and keys to select a printer from the list and
press
E NTER .
● Add a new printer to the list. (See "To add an HP JetSend-
enabled printer to the list .”)
3 The Paper Size and Quality settings appear in the upper right
corner of the display. To change these settings, see
“Changing
settings (optional)” on page 28 .
Device: HP LaserJet 4000 --(IP Addres
BAC NE SETTIN DELE