beautypg.com

Quickspecs – HP Z400 User Manual

Page 23

background image

without affecting other elements of the system.
Supports ACPI 2.0 for full compatibility with 64-bit operating systems.

Ownership Tag

A user-defined string stored in non-volatile memory that is displayed in the BIOS splash screen.

Remote Wakeup/Remote
Shutdown

System administrators can power on, restart, and power off a client computer from a remote location.

ASF 2.0 Compliant

Allows workstation status to be monitored on a remote console.

Instantly Available PC
(Suspend to RAM - ACPI
sleep state S3)

Allows for very low power consumption with quick resume time.

Remote System Installation
via F12 (PXE 2.1) (Remote
Boot from Server)

Allows a new or existing system to boot over the network and download software, including the
operating system.

ROM revision levels

Reports the system BIOS revision level in Computer Configuration Utility (F10 Setup). Version is available
through an industry standard interface (SMBIOS) so that management SW applications can use and
report this information.

System board revision
level

Allows management SW to read the revision level of the system board
Revision level is digitally encoded into the HW and cannot be modified.

Start-up Diagnostics
(Power-on Self-Test)

Assesses system health at boot time with selectable levels of testing.

Auto Setup when new
hardware installed

System automatically detects addition of new hardware.

Keyboard-less OperationThe system can be booted without a keyboard.

Localized ROM Setup

Common BIOS image supports System Configuration Utility (F10 Setup) menus in 12 languages with
local keyboard mappings.

Asset Tag

The user or MIS to set a unique tag string in non-volatile memory.

Per-slot Control

Allows I/O slot parameters (option ROM enable/disable, bus latency) to be configured individually.

Adaptive Cooling

Control parameters are set according to detected hardware configuration for optimal acoustics.

Pre-boot Diagnostics

(Pre-video) critical errors are reported via beeps and blinks on the power LED.

Industry Standard
Specification Support

Industry Standard

Revision Supported by the BIOS

ACPI

Advanced Configuration and Power Management Interface, Version 2.0c

ASF

Alert Standard Format Specification, Version 2.0

ATA (IDE)

AT Attachment 6 with Packet Interface (ATA/ATAPI-6), Revision 3b

CD Boot

"El Torito" Bootable CD-ROM Format Specification Version 1.0

EDD

Enhanced Disk Drive Specification Version 1.1
BIOS Enhanced Disk Drive Specification Version 3.0

EHCI

Enhanced Host Controller Interface for Universal Serial Bus, Revision 1.0

PCI

PCI Local Bus Specification, Revision 2.3
PCI Power Management Specification, Revision 1.1
PCI Firmware Specification, Revision 3.0, Draft .7

PCI Express

PCI Express Base Specification, Revision 2.0

PMM

POST Memory Manager Specification, Version 1.01

SATA

Serial ATA Specification, Revision 1.0a
Serial ATA 3.0Gb/s: Extensions to Serial ATA 1.5Gb/s, Revision 1.0

QuickSpecs

HP Z400 Workstation

System Technical Specifications

DA - 13276 Worldwide QuickSpecs — Version 1 — 3.30.2009

Page 23