HP Z400 - Manual (Page 20)

Access Panel Tool-less
Includes system board and memory information
Optical Drive Tool-less
Floppy Drive Tool-less
Hard Drives Tool-less
Expansion Cards Tool-less
Processor Socket Tool-less
Green User Touch PointsYes, on tool-free internal chassis components
Color-coordinated Cables
and Connectors Yes
Memory Tool-less
System Board Tool-less
Dual Color Power and HD
LED on Front of Computer Yes
Configuration Record SW Yes
Over-Temp Warning on
Screen Yes
Restore CD Set Restores the computer to its original factory shipping image - Can be obtained via HP Support
Dual Function Front Power
Switch Yes, causes a fail-safe power off when held for 4 seconds
Padlock Support Yes (optional): Locks side cover and secures chassis from theft
0.22-in diameter padlock loop at rear of system
Cable Lock Support Yes, Kensington Cable Lock (optional): Locks side cover and secures chassis from theft
3 mm x 7 mm slot at rear of system
Universal Chassis Clamp
Lock Support Yes (optional): Locks side cover and locks cables to chassis. Secures chassis from theft and allows
multiple units to be chained together when used with optional cable
Threaded feature at rear of system
Solenoid Lock and Hood
Sensor Yes (optional)
The Solenoid Hood Lock eliminates the need for a physical key by making the chassis lockable through
software and a password. You can also lock and unlock the chassis remotely over the network. The
Sensor Kit detects when the access panel has been removed
Rear Port Control CoverYes, locks rear IO cables to prevent cable theft
Serial, Parallel, USB,
Audio, Network,
Enable/Disable Port
Control Yes, enables or disables serial, USB, audio, and network ports
Removable Media
Write/Boot Control Yes, prevents ability to boot from removable media on supported devices (and can disable writes to
media)
Power-On Password Yes, prevents an unauthorized person from booting up the workstation
Setup Password Yes, prevents an unauthorized person from changing the workstation configuration
3.3V Aux Power LED on
System PCA Yes
NIC LEDs (integrated)
(Green & Amber) Yes
CPUs and Heatsinks A T-15 Torx or flat blade screwdriver is needed to remove the CPU heatsink before the CPU can be
removed. CPU removal is tool-less
QuickSpecs
HP Z400 Workstation
System Technical Specifications
DA - 13276 Worldwide QuickSpecs — Version 1 — 3.30.2009 Page 20