Hardware options installation, Introduction, Hard drive option – HP BL2X220C User Manual
Page 19: Introduction hard drive option
Hardware options installation 19
Hardware options installation
Introduction
If more than one option is being installed, read the installation instructions for all the hardware options
and identify similar steps to streamline the installation process.
WARNING:
To reduce the risk of personal injury from hot surfaces, allow the drives and the
internal system components to cool before touching them.
CAUTION:
To prevent damage to electrical components, properly ground the server before
beginning any installation procedure. Improper grounding can cause electrostatic discharge.
CAUTION:
To avoid damage to the server blade, do not operate the server blade unless both
processor sockets are populated with a processor and heatsink.
Hard drive option
Each server supports one internal SATA drive.
WARNING:
To reduce the risk of personal injury from hot surfaces, allow the drives and the
internal system components to cool before touching them.
To install the component:
1.
Power down the server blade (on page
2.
Remove the server blade (on page
3.
Access the internal server components (on page
4.
If installed, remove the USB device.
5.
Remove the hard drive carrier: