Network setup, What you need for a wired network, 2 network setup – HP D7200 User Manual
Page 7: 2network setup
2
Network setup
This section describes how to connect the HP Photosmart to a router, switch, or hub using
an Ethernet cable and how to install the HP Photosmart software for a network
connection. This is known as a wired or Ethernet network.
To set up the HP Photosmart on a wired
network, you need to do the following:
See this section:
First, collect all of the required materials.
“What you need for a wired network”
on page 5
Next, connect to a wired network.
“Connect the HP Photosmart to the network”
on page 6
Finally, install the software.
“Install the software for a network connection”
on page 7
What you need for a wired network
Before you connect the HP Photosmart to a network, make sure you have all of the
required materials.
❑ A functional Ethernet network that includes a router, switch, or hub with an Ethernet
port.
❑ CAT-5 Ethernet cable.
Although standard Ethernet cables look similar to standard telephone cables, they
are not interchangeable. There is a different number of wires in each one, and each
Network setup
5
Ne
twork setu
p