Honeywell SYSTEM OVERVIEW N7003V3 - Manual (Page 32)

– 32 –
Chime Mode
Using the 9 Key
Your system can be set to alert you to the opening of a door or window while
it is disarmed by using CHIME mode. When activated, three tones will sound
at the Keypad whenever a protected perimeter door or window is opened, and
the Not Ready message will be displayed. Pressing the READY key will
display the open protection points.
Note that Chime mode can be activated only when the system is disarmed.
1. To turn Chime Mode on, enter the security code and press 9 .
CHIME MODE ON The CHIME MODE ON message will appear
for about two seconds then disappear. To
display this message again (to determine
whether chime mode is on or off), simply press
and hold down the CHIME key for 5 seconds.
2. To turn Chime Mode off, enter the security code and press 9 again.
CHIME MODE OFF The CHIME MODE OFF message will appear
for about two seconds then disappear. To
display this message again (to determine
whether chime mode is on or off), simply press
and hold down the CHIME key for 5 seconds.