Removing an ir or anti-aliasing filter, Inserting a filter, Next – Hasselblad 645 User Manual
Page 43: About the dcs 645
About the DCS 645
43
Back
Removing an IR or Anti-aliasing Filter
CAUTION:
The Anti-aliasing filter and IR filter are fragile
devices and must be handled with care.
✔
Place a fingernail in the groove at the side
of the filter, and carefully remove the filter.
Inserting a Filter
1
Insert the two tabs at the left side of the filter
into the slots on the DCS 645.
2
Gently press the right side of the filter into
place until it is latched.
☛
Store the unused filter in the pocket of the
included body cap
.