Humax IRCI-ACE - Manual (Page 3)

**
The product has been manufactured to satisfy international safety standards. Please read the following safety precautions
and warning carefully.
**
• Disconnect the product from the mains before you start any maintenance or installation procedures.
• Do not overload a wall outlet, extension cord or adapter as this may result in electric fire or shock.
• The product should not be exposed to any liquids such as dripping or splashing. In addition, no objects filled with liquids, such as
vases, should be placed on the apparatus.
• Do not stand the product on soft furnishings or carpets. Do not stack electronic equipments on top of the product.
• Do not use any unsupported attachments as these may be hazardous or cause damage the product.
• Disconnect the product from the mains before connecting or disconnecting the cable from the antenna or TV.
• The LNB cable must be earthed to the system earth for the satellite dish.
• Place the product indoors to avoid exposing it to lightening, rain or sun. Do not place it near a radiator or heat register. Make sure it
has more than 10 cm clearance from any appliances susceptible to electromagnetic influences, such as a TV or a VCR.
Do not block these openings with any object, and do not place the product on a bed, sofa, rug, or other similar surface. If you place
the product on a rack or bookcase, ensure that there is adequate ventilation and that you have followed the manufacturer's
instructions for mounting.
Do not place the product on an unstable cart, stand, tripod, bracket, or table where it can fall. A falling product can cause serious
injury to a child or adult, and serious damage to the appliance.
• Unplug the product from the wall outlet and disconnect the antenna during a thunderstorm or when left unattended and unused for
long periods of time.
• Do not insert anything through the openings in the unit, where they can touch dangerous voltage points or damage parts.
• When replacement parts are required, be sure the service technician uses replacement parts specified by the manufacturer or
those that have the same characteristics as the original part. Unauthorised substitution may result in additional damage to the unit.
GB 2