Humax IRCI-ACE User Manual
Page 20
**
4. Satellite Setting
This menu appears only when you enable Motorised System in Antenna Setting menu and press the OK button while Antenna
Alternative in Manual Search menu is selected.
**
•
Satellite Name: Select a satellite to identify a motor antenna. If the desired satellite name is not listed, then select OTHER.
•
Movement: In user mode, this is used to fine-tune the position of the motor. In installer mode, this is used to search for the position
of the satellite manually.
•
Motor Control: You can select one option among Search, Goto, Store, or
Reset.
**
- Search: Searches for services on the selected transponder.
- Goto: Moves the motor to the saved position of the selected satellite.
- Store: Saves the current position of the motor for the selected satellite.
- Reset: Resets all saved positions of the motor relative to the 0 position.
(Installer Mode Only)
•
DiSEqC Command Mode: Select Installer or User mode.
**
The following table shows the value of the motor setting options.
**
DiSEqC Command Mode
Movement
Motor Control
Installer
East / Stop / West
Search / Goto / Store / Reset
User
Stop(60E) ~Stop(0) ~Stop(60W)
Search / Goto / Store
GB 19