beautypg.com

Quickspecs, Hp proliant dl165 generation 7 standard features – HP DL165 User Manual

Page 4

background image

Network Controller

(2) HP NC362i Integrated Dual Port Gigabit Server Adapter

Expansion Slots #

Technology

Bus

Width

**

Connector

Width

Bus

Number

*

Device No.

**

Form

Factor

Notes

1

PCI-Express

2.0

x16

x16

5

0

Full

Height/Full

Length

3.3 volts

2

***

PCI-Express

2.0

x4

x8

2

0

Low Profile,

Internal Only

3.3 volts

* Default bus assignment. Inserting cards with PCI bridges may alter the actual bus assignment
number.
** Slots are enumerated differently based on OS. MS OS's enumerate from lowest to highest
Device ID by bus (starting with the lowest bus).
***In order to access expansion slot #2, the low profile internal only slot, expansion slot #1 may
only be populated with a half length, full height form factor card.

Storage Controller

Non-Hot Plug SATA

HP Smart Array B110i SATA RAID Controller

NOTE: To enable RAID for embedded SATA controller, use EZ set-up
CD to download driver, hpahcisr.sys, is part of the 8.20 PSP, Smart
Start, EZSetup CD. For more information on Smart Array B110i, go to:

www.hp.com/go/sataraid

Cold Plug SATA Models HP Smart Array B110i SATA RAID Controller

NOTE: Supported on LFF models only.

Hot Plug SATA/SAS

HP Smart Array P410 Controller (RAID 0/1/1+0)
HP Smart Array P410 Controller 256 BBWC (RAID/0/1/1+0/5/5+0)

NOTE: Transfer rate: up to 3 Gb/s SATA, up to 6 Gb/s SAS.

HP Smart Array B110i SATA RAID Controller

NOTE: Hot plug functionality requires the addition of a Smart Array
Advanced Pack License Key upgrade (P/N TC421A)
NOTE: To enable RAID for embedded SATA controller, use EZ set-up
CD to download driver, hpahcisr.sys, is part of the 8.20 PSP, Smart
Start, EZSetup CD. For more information on Smart Array, go to:

www.hp.com/go/sataraid

NOTE: A diskette drive or virtual FDD using LO100 Advanced Pack is needed to install storage
controller drivers during a Windows operating system installation from a CD.
NOTE: Addition of the battery backed cache upgrade enables BBWC, RAID 5, 5+0, array
expansion, logical drive extension, RAID migration, and stripe size migration.
NOTE: RAID 6 functionality requires the addition of Smart Array Advanced Pack (P/N: 516471-
B21).

QuickSpecs

HP ProLiant DL165 Generation 7

Standard Features

DA - 13602 Worldwide QuickSpecs — Version 2 — 4.2.2010

Page 4