beautypg.com

Quickspecs – HP DL165 User Manual

Page 15

background image

HP Hard Drives

NOTE: The components of a storage subsystem (e.g. the drive, the
HBA/controller, and the server backplane) should operate at the same data
transfer rate or the system bandwidth will be negotiated down to an acceptable
level for all components.
NOTE: Hard drives have either a one year or three year warranty; refer to the
specific hard drive QuickSpecs for details.
NOTE: A minimum of one SATA Non-Hot Plug hard drive is required ONLY
when purchasing Non-Hot Plug CTO Chassis Model (P/N 591660-B21) in Step
1.

Serial-ATA (SATA) Non-Hot Plug Hard Drives (Non-Hot Plug Models Only)

SATA Non-Hot Plug LFF (3.5-inch) Entry (ETY) Drives

HP 250GB 3G SATA 7.2K rpm LFF (3.5-inch) Non-hot Plug Entry 1y Wty Hard
Drive

571232-B21

HP 160GB 3G SATA 7.2K rpm LFF (3.5-inch) Non-hot Plug Entry 1y Wty Hard
Drive

458947-B21

SATA Non-Hot Plug LFF (3.5-inch) Midline (MDL) Drives

HP 2TB 3G SATA 7.2K rpm LFF (3.5-inch) Non-hot Plug Midline 1y Wty Hard
Drive

507774-B21

HP 1TB 3G SATA 7.2K rpm LFF (3.5-inch) Non-hot Plug Midline 1y Wty Hard
Drive

507772-B21

HP 750GB 3G SATA 7.2K rpm LFF (3.5-inch) Non-hot Plug Midline 1y Wty Hard
Drive

462595-B21

HP 500GB 3G SATA 7.2K rpm LFF (3.5-inch) Non-hot Plug Midline 1y Wty Hard
Drive

458941-B21

HP 250GB 3G SATA 7.2K rpm LFF (3.5-inch) Non-hot Plug Midline 1y Wty Hard
Drive

458939-B21

HP Storage Controllers

NOTE: With the HP Smart Array P410 Controller, the addition of the battery
backed cache upgrade enables BBWC, RAID 5, 5+0, array expansion, logical
drive extension, RAID migration, and stripe size migration. In order to upgrade to
RAID 6, at least 256MB Cache and a Battery is required in addition to the Smart
Array Advanced Pack license (P/N 516471-B21).
NOTE: To use the internal only PCI-e slot when purchasing the Hot Plug CTO
Chassis, a HP Smart Array P410 controller must be selected. When selecting
the HP Smart Array P212 Controller (P/N 491191-B21), the controller will be
installed in the x16 slot since it has both an internal and external port. This
prevents the use of the internal slot and no PCI-E slots will be available.
NOTE: A minimum of one primary HP Storage Controller is required ONLY
when purchasing SFF CTO Chassis Model (P/N 592227-B21) in Step 1.

HP Smart Array P812/1G Flash Backed Cache Controller

487204-B21

HP P410 w/1G Flash Backed Cache Controller

572532-B21

HP P410 w/512MB Flash Backed Cache Controller

578230-B21

HP P410/Zero Memory FIO Smart Array Controller

462860-B21

HP P410/256MB Smart Array Controller

462862-B21

HP Smart Array P410/256MB w/ Battery FIO

491195-B21

HP P410/512MB BBWC Smart Array Controller

462864-B21

QuickSpecs

HP ProLiant DL165 Generation 7

Configuration Information - Factory Integrated Models

DA - 13602 Worldwide QuickSpecs — Version 2 — 4.2.2010

Page 15