System specifications, Quickspecs – HP DL165 User Manual
Page 34
Power
ProLiant DL165 G7 Fully Configured
115V/60Hz
220V/50Hz
Fully Loaded System Input Wattage (W)
568
556
Fully Loaded System Input Current (A rms)
4.99
2.58
Fully Loaded System Thermal (BTU- Hr)
1939.15
1898.18
Fully Loaded System VA (Volt-Amp)
574
567
System Inrush Current with all power supplies
loaded (A)
30
30
Power cord requirements
Nema 5-15P to IEC320-
C13
IEC320-C13 to IEC320-C14
NOTE: Power shown is for a fully configured system consisting of (2) CPU, (8) double-sided DIMMs, (2) HDDs, (1) CD-
ROM, and (2) PCI cards.
Power Cord
AF556A
Server Power Cords
One 6' Highline (IEC-IEC) power cord ships standard
NOTE: HP ProLiant DL servers no longer ship standard with NEMA
power cords (163719-002) that allow connection to 110V US wall
outlets in a home or office. ProLiant DL servers are primarily
connected to PDU's in data center racks so they now ship standard
with only a PDU power cord (416151-B21). If a user wishes to power
a ProLiant DL server using a 110V receptacle (NEMA-15), the NEMA
power cord (227099-001) must be ordered separately.
If customers require a local power cord, they can check the power
cord matrix for the appropriate cord. Please see the following power
cord matrix:
QuickSpecs
HP ProLiant DL165 Generation 7
System Specifications
DA - 13602 Worldwide QuickSpecs — Version 2 — 4.2.2010
Page 34