HP E1367A - Manual (Page 55)

Parameters
Parameter Name Parameter Type Range of Values
numeric 1-99
Comments
•
RF Multiplexers Model Number:
The
SYSTem:CTYPe? < number > command returns
" HEWLETT-PACKARD,E1366A,0,A.01.00 " (E1366A), or
returns " HEWLETT-PACKARD,E1367A,0,A.01.00 "
(E1367A), where the " 0 " after " E1366A " or " E1367A " is the
module serial number (always 0) and " A.01.00 " is an example
of the module revision code number.
Example Reading the Model Number of a Card #1 Module
SYST:CTYP? 1 ! Return the model number
:CPON
SYSTem:CPON < number > | ALL sets the selected module (card) in a
switchbox to its power-on state.
Parameters
Parameter Name Parameter Type Range of Values
numeric 1-99
Comments
•
RF Multiplexers Power-On State: The power-on state is all
channels (relays) open. Note that
*RST opens all channels of all
modules in a switchbox, while SYSTem:CPON opens the channels
in only the module (card) specified in the command.
Example Setting Card #1 Module to its Power-on State
SYST:CPON 1 ! Sets module #1 to power-on state
Chapter 5 HP E1366A/E1367A RF Multiplexers Command Reference 55