Changing multiplexer components 23, Changing multiplexer components, 23, Changing, 23 – HP E1367A User Manual

Page 23: Fuses, location of, 23, Interrupt priority jumpers, 23, Logical address switch, setting of, 23, Components, changing of, 23, Logical address switch, 23, Logical address, 23, Setting of, 23

Text mode
Original mode

Changing Multiplexer Components

As required, you can change the logical address switch setting, replace the
protection fuses, change the interrupt priority jumper setting, or remove
channel termination resistors. See Figure 2-5 for locations.

Figure 2-5. RF Multiplexer Component Locations

Chapter 2

Configuring the HP E1366A/E1367A RF Multiplexers 23

This manual is related to the following products:

E1366A