HP DX2300 - Manual (Page 7)

QuickSpecs
HP Compaq dx2300 Microtower Business PC
System Details
EMEA edited August 29, 2007 –details may vary by region Page 7
Memory Type PC2-5300 DDR2 SDRAM (667-MHz) non-ECC
Up to 2-GB system memory standard
Up to 4-GB system memory supported Technology and
Features
Hard Drive
Interfaces Supported Serial ATA
Front Panel Power button
Power On LED
HDD Activity LED
Cooling Solutions
Supported Power Supply Fan (variable speed)
Active heatsink (variable speed)
Chassis fan (variable speed)
Slots Supported Four (4) full-height expansion slots
Front I/O Two (2) USB 2.0 ports
Rear I/O Standard Micro ATX I/O connectors, including four (4 ) USB 2.0 ports
Drive Bays Two (2) 5-1/4” external
One (1) 3-1/2” external
Two (2) 3-1/2” internal
Internal Speaker Standard
Security Padlock loop
Kensington Lock Support
Chassis
Power Supply 250-watt ATX Power Supply – PFC/non-PFC with a 115v/230v line
switch (varies by country/region)
General Unit Operating Guidelines
• Keep the computer away from excessive moisture, direct moisture and the extremes of
heat and cold, to ensure that unit is operated within the specified operating range.
• Leave a 4 in (10.2 cm) clearance on all vented sides of the computer to permit the
required airflow.
• Never restrict airflow into the computer by blocking any vents or air intakes.
• Do not stack computers on top of each other or place computers so near each other that
they are subject to each other's re-circulated or preheated air.
• Occasionally clean the air vents on the front, back, and any other vented side of the
computer. Lint, dust and other foreign matter can block the vents and limit the airflow.
• If the computer is to be operated within a separate enclosure, intake and exhaust
ventilation must be provided on the enclosure, and the same operating guidelines listed
above will still apply.
Operating 50° to 95° F (10° to 35° C) Temperature Range
Non-operating -22° to 140° F( -30° to 60° C)
Operating 10% to 90% (non-condensing at ambient)
Unit Environment
and Operating
Conditions
Relative Humidity
Non-operating 5% to 95% (non-condensing at ambient)