HANNspree LIQUID CRYSTAL DISPLAY TELEVISION ST09-10A1 - Manual (Page 31)

29
Switching Source Signals
Press the SOURCE button to select
different source signals.
CH, AV1, and AV2 appear on the top
right corner of the screen in that
order.
Note
The TV supports S-Video input in addi-
tion to normal video and audio signals.
The TV detects the signal type automat-
ically and gives priority to S-video when
two signals are detected at the same
time.
Adjusting the Volume
1
Press the VOL UP button to
increase the volume.
2
Press the VOL DOWN button to
decrease the volume.
3
Press the MUTE button. The word
“MUTE” appears on the top right
corner of the screen and sound is
turned off.
4
Press the MUTE button again to
restore the original volume.
CH 33
Source
MUTE
Volume up
Volume down