HANNspree LIQUID CRYSTAL DISPLAY TELEVISION ST09-10A1 - Manual (Page 30)

28
Turning the TV On and Off
1
Press the POWER button on the
remote control or on the TV control
panel. The power LED indicator on
the front of the TV changes from
red to green, indicating that the
power is on.
2
Press the POWER button
again. The power LED changes
from green to red, indicating that
the TV is in standby (off) mode.
Selecting Channels
1
Press the CH UP button to
increase the channel number by
one.
2
Press the CH DOWN button to
decrease the channel number by
one.
3
Enter the specific channel number
by pressing the number buttons
on the remote control. The
channel is displayed on the LCD
panel.
CH 33
Power button/Power LED
CH 33
Channel up
Channel down