HP 430se - Manual (Page 52)

46 Hewlett-Packard Jornada 430/430se Palm-size PC
Get Connected dialog box is displayed. You do not need
to restart your desktop PC.
4. Connect the P/PC to the desktop PC using the travel
cable, as described next.
Connecting by travel cable
The HP Jornada uses a serial connection to communicate with a
desktop PC. The serial connection is established with the travel
cable (included with the HP Jornada) and a 9-pin serial
communications port on your desktop PC.
To connect the HP Jornada to your desktop PC
1. Insert the 9-pin end of the travel cable into a serial port
on your desktop PC.
2. Plug the travel cable into the HP Jornada and connect to
AC power.
3. Turn on the P/PC. ActiveSync checks the communication
port, and starts the New Partnership Wizard, which
leads you through the steps listed in the next section.
You can also connect to a desktop PC using an infrared port (if
the desktop PC also has an infrared port). F or m ore
information, see the Connecting by infrared section in this
chapter.