HP StudioJet - Manual (Page 46)

48 Ioline FlexJet E User Guide
Print Cartridge Storage
Short-term Storage (7 days or less)
n Simply leave the print cartridge in the machine, capped in the
Service Station .
n If the cartridge was not in the Ser-
vice Station , it may require manual
cleaning.
Long-term Storage (greater
than 7 days)
n lace the print cartridge upside-
down in an air-tight container. Lay
a sponge or cloth dampened with
de-ionized water next to it to help
prevent the cartridge from drying
out.
n To return the cartridge to service, follow the manual cleaning
procedure above.
Updating Firmware
using the Control Center
Summary
1. Prepare the printer.
2. Check the Current Version.
3. Update the firmware.
Prepare the printer for a Firmware Update
1. Power on the PC and printer.
2. Ensure that the serial cable is connected between the PC and
the printer.
3. Copy the firmware file to the folder c:\Ioline\Firmware (or
another location that is easy to remember.)
Check the Current Firmware Version
1. Start the Control Center.
2. The main screen shows the current firmware version in the up-
per right corner.
Figure 34. Ink cartridges
should be stored in an air-
tight container.
If the firmware file is a ZIP
archive, make sure it is decom-
pressed before sending it to the
printer. You can download a ZIP
decompression utility at
http://www.winzip.com if
necessary.
Note
i