Hitachi VT-FX6510A - Manual (Page 62)

PROGRAMMING THE VCR REMOTE TO CONTROL YOUR TV
PROGRAMMING THE VCR REMOTE TO CONTROL
YOUR TV
The VCR remote control can be programmed to control many TV brands that are remote controlled.
1 Turn on the TV.
2 Point VCR remote control toward TV.
3 Press and hold the "TV" button.
4 Press the remote button corresponding to your TV brand as shown in the set-up chart. The TV
channel will change to confirm that the remote control has been set.
TV Brand Press "TV"
and this
remote button TV Brand Press "TV"
and this
remote button TV Brand Press "TV"
and this
remote button
Hitachi 1 Gold star 1 6 Panasonic 1
CH
Zenith 2 Toshiba 7 Mitsubishi
CH
Sony 3 Gold star 2 8 JVC 100/ENT
Magnavox 4 Panasonic 2 9 Sharp 1 VOL (UP)
Sanyo 5 RCA 0 Sharp 2 AVX
Note: If your TV brand is not listed on the Set-Up Chart, try all the buttons listed in the chart until the TV
changes channels. If the TV channel does not change, you won't be able to program the remote for your
TV.