Hitachi VT-FX6510A User Manual

Page 27

Text mode
Original mode

CABLE BOX SETUP

6 Press the GUIDE button. The main on-screen menu will appear on the TV screen.

7 Press the

cursor button to select SETUP option, and then press the ENTER.

Note: Refer to the cable box owner's manual to identify the cable box output channel (usually 3 or 4).

8 Press the

cursor button to select "VCR PLUS+ SETUP", and then press the ENTER button.

9 Press the ENTER button to answer "YES" to the question "IS CABLE BOX BEING USED?"

Or, if you want to select "NO", press the

cursor button and then the ENTER button.

If you select "YES", you need not operate "VCR PLUS + SETUP" (see page 44). During delayed
recording, the VCR channel will automatically switch to the cable box output channel.

10 Using the VCR remote, press the

cursor button to enter the cable box output channel

numbers.

11 Press the GUIDE button to end this setting.