Hitachi VT-FX6510A - Manual (Page 47)

INSTANT RECORDING TIMER
INSTANT RECORDING TIMER
Using the Instant Recording Timer (IRT)
The Instant Recording Timer (REC/IRT button on the VCR) will let you make a simplified timer recording
without having to use the programming timer. In order to set the IRT properly the clock must be set before
starting.
1 Follow the steps 1 through 5 on "Basic recording steps" on pages 35 and 36.
2 Press the REC/IRT button twice to indicate the recording time on the display.
You may increase the recording time by 30 minutes each time you press the REC/IRT button.
While you are recording, the remaining recording time is shown on the VCR display.
At the end of your recording, the display will read "0:00", recording will stop automatically, and the VCR
will turn itself off.
To stop recording while in the IRT mode:
1 Press the STOP button.
This can be done either on the VCR or with the remote control.