Setting the clock, Tips to set the clock, Tips – Hitachi VT-FX6510A User Manual

Page 21

SETTING THE CLOCK

SETTING THE CLOCK

Note: An antenna or cable must be connected to the VCR before you begin this operation.

Tips

1 You'll need to set the clock when first hooking up your VCR, and any time the power goes out more than 30
seconds. When you first plug in the VCR or after a power outage, the clock display will read "--:--".

To set the clock

Note: Turn on the TV and select the video channel (3 or 4). Or, if you are hooked up with an audio/video cable,
set the TV to AUX or VIDEO.

1 Press the GUIDE button.
The main on-screen menu will appear on the TV screen.

You may view all the on-screen instructions in English, French, or Spanish. When you first set up

your VCR, it will be set to English. Press the

cursor button to select LANGUAGE option, and

then press the

cursor button for French or for Spanish.

2 Press the

cursor button to select the SETUP option, and then press the ENTER button.

3 Press the

cursor button to select the CLOCK, and then press the ENTER button.

4 Press the

cursor button to change the hour.

The "AM" or "PM" can be select when you change the hour.