Hitachi VT-FX6510A User Manual

Page 57

EASY DELAYED RECORDING WITH THE VCR PLUS+ SYSTEM

5 Press the

cursor button to select ONE TIME, DAILY or WEEKLY PROGRAM, and

then press ENTER button.

Note: Programming does not take effect unless you select one of these options.

6 Press the

cursor button to select tape speed, and then press the

cursor button or

TAPE SPEED to choose recording speed SP (standard play) or EP (extended play).
The screen will display all the details of the program you chose. Check the CH number to make sure it is
the right one.
If not, you need to check your VCR Plus+ channel setup again.
If you have installed a cable box (see page 23), the cable box output will appear in the CH column.

7 Review the screen to be sure everything is set as you want, then press the PROG./VCR button to
complete your programming or continue with additional programs.

Note: If program is overlap, the VCR gives you an error message that disappears from the screen in about 5
seconds.

8 Press the POWER button to turn off the VCR.