Hitachi HV-F31F - Manual (Page 49)

35
Add a filter to the lens or illumination to decrease the color temperature.
16h: The color temperature is too low, making it impossible to reach the optimum value.
(If there is no problem in practical application, use the camera under the current
condition.) Add a filter to the lens or illumination to increase the color
temperature.
18h: Carry out auto setup again. If this message appears in repeated attempts, it is
necessary to inspect the inside of the camera. In this case, notify your local
Hitachi Denshi sales agent or Hitachi Denshi service office
1Fh: The color saturation is too low, making it impossible to reach the optimum value
24h:
Release the long shutter mode.
25h: Release the external trigger mode.
26h: Change a frame rate to the one under 30fps (HV-F22F only)