Control and status register (csr) – Hitachi HV-F31F User Manual

Page 26

Text mode
Original mode

Control and Status register (CSR)

HV-F31F and HV-F22F differ from earlier conventional cameras in that camera functions can be set by
entering predetermined setting commands in the Control and Status register (CSR) of the 1394-based
Digital Camera Specification Ver. 1.30.
Common and camera-specific CSR register setting operations are described below.

Indication example： Function name

(CSR: xxxx xxxx h)

Function description

Lower 32 bits of 64 bit CSR address are displayed.
ex： F0F0 0800 h

means BUS_ID, NODE_ID, FFFF F0F0 0800 h.

This manual is related to the following products:

HV-F22F