Hitachi HV-F31F - Manual (Page 16)

2
NOTE:
1) The included driver and also demonstration software within CD-ROM operate only in Windows 98
SE/ME/2000/XP.
2) The viewer software may not operate normal when it is used for the other camera, because
software for HV-F31F and HV-F22F.
3) In the case that it stopped normal operating during the use of viewer software, stop a viewer
software, turn off and on the camera power supply or pull and push the IEEE1394 cable, execute
viewer software once again.
4) In the case that the performance (the CPU clock, installation memory etc.) of PC is not sufficient,
viewer software may not execute normally. Please use PC of following specification.
Item Specifications
CPU Intel Celeron 533MHz or more
Memory 256MByte or more
Display Card 24bit RGB color display card or more
Interface Card built-in OHCI IEEE1394 port or PCI-Card or PC-Card
Operating System Windows 98SE / Me / 2000 / XP
Others DirectX 8.0 or more
5) Hitachi kokusai Electric. Inc does not guarantee it, regarding the faulty, damage of the hardware
and also software of the customer by a driver and also viewer software.