Hitachi HV-F31F - Manual (Page 40)

26
e) (SHARPNESS) COLOR DTL Ch1 (CSR: F200 00C0 h)
Color detail can be adjusted in the range of the color phase sharpness level setting.
The color phase can be set in different ranges for channels 1 and 2. The color detail channel 1
width/level can be set in any combination. Select channel 1 or 2, then set the color phase for adjusting
detail.
-OFF-
Setting value 80000000 h
Color detail function is set to OFF.
-ON (Manual adjustment)-
Setting value 82000xyy h x: 0- R, Y- 1, 2- G, 3- C, 4- B, 5- M (phase)
yy: 00h to FFh ( phase(fine) )
Select 6 color phases from x values and then fine adjust with yy.
-One Push (AUTO SETUP)-
Setting value 86000000 h
The currently displayed color phases are automatically set by AUTO SETUP.
f) (SHARPNESS) COLOR DTL Ch1 WIDTH/LEVEL (CSR: F200 00C4 h)
The effective phase range and sharpness level can be adjusted.
-Manual adjustment-
Setting value 820xx0yy h xx: 00h to FFh (Width)
yy: 00h to FFh (Level)
Set color phase range with xx value. Reduce range toward 00h; increase range toward FFh. Select