HP KAYAK XU800 - Manual (Page 18)

Your PC Workstation Does Not Start Correctly
Case 4 — Boot Process Fails
18
5 Processor test error. Check that:
• Processor is correctly installed.
• Termination card installed in processor slot 2 in
a single processor system.
• Refer to page 13 for further actions to take.
If the error still occurs, replace:
1 Processor.
2 system board.
6 Input/Output (I/O) error. • Keyboard is connected.
• PCI card is installed correctly.
• Termination card installed in processor slot 2 in
a single processor system.
7 The processor on the system board
generated an error. • Refer to page 13 for further actions to take.
If the error still occurs, replace the system board.
8 The system video card is either missing or
faulty. This is not a fatal error. Check that the video card
is correctly installed and cabled. If missing, install
the video card. If the error still occurs, replace it
with a known working video card.
9 The BIOS Checksum value does not match
the value encoded in the BIOS. Perform the following actions in this order:
1 Press F2 to enter the Setup program, then
F9 to load the default BIOS settings.
2 Clear the CMOS. Refer to page 37 for
instructions.
3 Flash the BIOS. Refer to page 36 for
instructions on how to update the BIOS.
If the error still occurs, replace the system board.
10 The CMOS RAM has failed. Perform the following actions in this order:
1 Press F2 to enter the Setup program, then
F9 to load the default BIOS settings.
2 Clear the CMOS. Refer to page 37 for
instructions.
3 Flash the BIOS. Refer to page 36 for
instructions on how to update the BIOS.
If the error still occurs, replace the system board.
11 The cache memory test failed. Replace the processor(s).
Number
of Beeps
Description Action to Take...
Yits.bok Page 18 Friday, December 17, 1999 11:33 AM