HandHeld Entertainment 4600r - Manual (Page 78)

4 - 6
Next, scan the Character to Trigger Delay barcode, then the 2-digit hex value
for the ASCII character that will trigger the delay ASCII Conversion Chart (Code
Page 1252) , page A-4.
To remove this delay, scan the Delay Length barcode, and set the number of
steps to 0. Scan the Save barcode using the Programming Chart inside the
back cover of this manual.
Interfunction Delay
An interfunction delay of up to 495 milliseconds (in 5 ms steps) may be placed
between the transmission of each segment of the message string. Scan the
Interfunction Delay barcode below, then scan the number of 5 millisecond
steps (0-99), and the Save barcode using the Programming Chart inside the
back cover of this manual.
To remove this delay, scan the Interfunction Delay barcode, then set the num-
ber of steps to 0. Scan the Save barcode using the Programming Chart inside
the back cover of this manual.
Delay Length
Character to Trigger Delay
Interfunction Delays
Prefix Scanned Data Suffix
1 2 3 4 5 STX HT CR LF
Interfunction Delay